Enquire Now100 MM (4″) SUBMERSIBLE PUMPSETS
- Description
- Product / Operating Range
- Application
- Features / MOC
- Downloads
Product Description
AQUAGROUP’S “TEXMO” 4″ SUBMERSIBLE PUMPSETS are easy to install, efficient and require minimum maintenance. A wide range of pumps are available to meet diverse operating requirements. Motors are water lubricated and feature robust thrust bearings. Good quality materials are used to obtain long life and facilitate easy service.
Product Data
| PARTICULARS | DETAILS |
| Bore size min. | 4”and above |
| Power Range | 0.5 to 7.5 HP |
| Voltage Range | 220V- 240V, AC Single phase , 50Hz 340V- 440V, AC Three phase , 50Hz |
| Speed | 2900RPM |
| Motor Type | Water filled water cooled Induction motor |
| Coupling | Key / NEMA |
| Head | Maximum 371 M |
| Discharge | Maximum 30,000 LPH |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | Maximum 50 bar |
| Sand content in water | Maximum 50 PPM |
Applications
- Water extraction from bores of diameter 4″ (100mm) and above
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Domestic water supply to large residences and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
Industrial water supply
Features
- Energy efficient motor
- Water filled motor with easily rewindable stator
- Suitable for single phase 220 V and three phase 380 V, 50 Hz power supplies
- Corrosion resistant stainless steel stator casing
- Energy efficient radial and mixed flow pumps
- Wear resistant high strength engineering polymer impellers and diffusers with stainless steel inserts
- Stainless steel stage housings / Stainless steel pump shell
- Customized pumpsets are available on request
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
- Higher stage pumps are available in modular construction for ease of assembly,tranport and installation
Material of Construction
| PARTICULARS | DETAILS |
| MOTOR | |
| Stator Shell | Stainless steel |
| Thrust Bearing | Carbon with stainless steel segments |
| Journal Bearings | Bronze/ Carbon |
| Diaphragm | Nitryle Rubber |
| Shaft | Stainless steel |
| PUMP | |
| Pump shaft | Stainless steel |
| Discharge casing | Cast Iron / Bronze |
| Inlet bracket | Cast Iron / Bronze / SS |
| Diffuser assembly | Engineering Plastic |
| Impeller | Engineering Plastic |
| Strainer | Stainless steel |
| J series pump shell / R series Diffuser housing | Stainless steel |
Enquiry form
